CSCF IFC Trigger Point Mode Commands

 

 

The CSCF iFC Trigger Point Configuration Mode is used to associate an Initial Filter Criteria (iFC) Service Point Trigger (SPT) group with an iFC trigger point.

 

Important: The commands or keywords/variables that are available are dependent on platform type, product version, and installed license(s).

 

end

Exits the current mode and returns to the Exec Mode.

Product

All

Privilege

Administrator

Syntax

end

Usage

Change the mode back to the Exec mode.

 

exit

Exits the current mode and returns to the previous mode.

Product

All

Privilege

Administrator

Syntax

exit

Usage

Return to the previous mode.

 

spt-group

Assigns an existing iFC SPT group to an iFC trigger point.

Product

SCM (S-CSCF, SIP Proxy)

Privilege

Administrator

Syntax

[ no ] spt-group name group_name

no

Removes the specified CSCF iFC SPT group from the iFC trigger point.

spt-group name group_name

Specifies the name of an existing iFC SPT group.

group_name must be from 1 to 39 alpha and/or numeric characters in length.

Important: An iFC SPT group can be assigned to more than one iFC trigger point.

Usage

Use this command to associate an iFC SPT group with an iFC trigger point.

Example

The following command assigns an iFC SPT group named group2 to an iFC trigger point:

spt-group name group2

 

 

Cisco Systems Inc.

Tel: 408-526-4000

Fax: 408-527-0883